Air Tools and Filter, Regulator Lubricators
A tool’s power is dependent on the amount of air in the motor, and there are typically two methods of regulating the power with the air. The first one is by regulating the air pressure, the second is by acting on the air flow directly by either selecting the right air compressor, or by using the correct hose diameter.
Most pneumatic tools on the market are designed to run optimally on 90 PSI / 6.3 bars. Operators should use an air regulator to gauge the pressure while the tool is connected to the compressor.
A Filter Regulator Lubricator (FRL) limits the air pressure going into the tool and allows regulation of air pressure through the hose. It gives precision to power settings – to adjust the air pressure and achieve better accuracy, mechanics should use a gauge-equipped FRL. If the tool doesn’t receive the air pressure recommended for that tool, then it goes without saying that the tool will not deliver what is expected from its settings.
Over the years, the design of tools has evolved to enable operators to have better control of the air flow. In the first half of the 20th Century, early, classical models had a lever on the back which was depressed to reduce the air flow inside the tool. These basic impact wrenches employed simple technology that could be used with one hand, but they were never fully precise.
During the last decade, more attention has been given to the ergonomics and tool’s handling. Most tools were still designed to be operated with one hand, and had clever designs enabling the operator to change the direction of rotation and vary the torque level using a single hand.
Today, focus is being given to delivering the highest levels of precision combined with ergonomics. Tools are being designed to give finer air regulation, and therefore better torque control. Innovation can be found in the newest impact wrenches to help mechanics work more efficiently; for example they don’t need to move the tool to moderate its power as the controlling area is on the back of the tool, with easy access.
Furthermore, specific tools have been developed to prevent overtightening of bolts – for example torque limited impact wrenches. Today’s tools give mechanics better control. The tools have customized settings so the operators can choose how much torque is required.
“There is no ‘one-size-fits-all’ tool for every garage application, but instead, the best tool for the job depends on the mechanic’s needs, habits and comfort. There is a large choice of impact wrenches available which need to be selected based on several criteria – an important one being how finely you need to control power and torque.”
Yann Pasco , Global Business Development Manager – Vehicle Service
Whilst on site AHPC can provide lubricant analysis including. Inspect test and adjustment of onsite FRL systems to ensure efficient delivery of crucial lubricants to you tooling.